国产精品久久久久久久裸模,搜索欧美一级黄色片,性夜夜久久久夜,国产91在线99

歡迎光臨深圳市銳創達電子有限公司官網
24小時服務熱線:075582370515
產品中心 > BM1032S-0527-30
BM1032S-6_副本.jpg
  • BM1032S-6_副本.jpg
  • BM1032S-3_副本.jpg
  • BM1032S-1_副本 - 副本.jpg
  • BM1032S-4_副本.jpg
  • BM1032S-5_副本 - 副本.jpg
  • BM1032S.jpg

BM1032S-0527-30

1. SPECIFICATION

1.  Technical Parameter

Measuring condition

 Part shall be measured under a condition (Temperature: 535, Humidity: 45%85%R.H., Atmospheric pressure: 860 1060hPa) unless the standard condition (Temperature: 25±3, Humidity: 60±10%R.H. Atmospheric pressure: 860 1060hPa) is regulated to measure

1

Dimension

10.0×10.0×3.2

2

Net Weight

Approx 0.8g

3

Rated Voltage

5.0 Vo-p

4

Operating Voltage

4.06.0Vo-p

5

Rated Current

Max.90mA ,at 2.7KHz 50% duty Square Wave 5.0Vo-p

6

Sound Output

Min. 85dB,at 2.7KHz 50% duty Square Wave 5.0Vo-p

7

Coil Resistance

30±5Ω

8

Resonant Frequency

2700Hz

9

Operating Temperature

-20℃~+70

10

Store Temperature

-30℃+80℃

Dimensions

Unit: mm

1(2).png

*Unit: mm; Tolerance: ±0.3mm Except Specified

*Housing Material: Black LCP

 

2. Reliability Test

After any following tests the part shall meet specifications without any degradation in

appearance and performance except SPL. SPL shall not deviate more than -10 dB

from the initial value

2.1 Ordinary Temperature Life Test

The part shall be subjected to 96 hours at 25±10. Input rated voltage

Resonant frequency, 1/2 duty Square wave.

2.2 High Temperature Test

The part shall be capable of with standing a storage temperature of +85 for 96 hours.

2.3 Low Temperature Test 

The part shall be capable of with standing a storage temperature of -40 for 96 hours.

2.4 Humidity Test

Temperature:+40℃±3  Relative Humidity:90%95% Duration: 48 hours

and expose to room temperature for 6 hours

2.5 Temperature Shock Test

Temperature:70/1hour25/3hours-30/1hour25/3hours (1cycle)

Total cycle: 10 cycles

2.6 Drop Test

Standard Packaging From 1.2m(Drop on hard wood or board of 5cm thick,

three sides, six plain.)

2.7 Vibration Test

Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes

Note:

As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. SPL down) may occur if foreign material enter it.

3. Electrical And Acoustical Measuring Condition

3.1 Recommended Driving Circuit

Resonant frequency, 1/2 duty cycle. Square wave.Signal amplitude should be large enough to saturate the transistor.

2(2).png 

3.2 Recommended Setting

 

3(2).png 

 

 

4. Surface mounting condition

5.1 Reflow soldering

Recommendable reflow soldering condition is as follows.

4(2).png 

Note: (1) In automated mounting of the SMD sound transducers on PCB, any bending, expanding

and pulling forces or shocks against the SMD sound transducers shall be kept minimum

to prevent them from electrical failures and mechanical damages of the devices.

(2) In the reflow soldering, too high soldering temperatures and too large temperature

      Gradient such as rapid heating or cooling may cause electrical failures and mechanical

damages of the devices.

 

 

5. Frequency Response

5(3).png

3.6Vo-p 50% duty Square wave,10cm

6. Packing

5.1Dimension Of Carrier Tape

6(2).png

 

7.png

5.2Dimension Of Plastic Reel

8.png


上一個: BM1370S-0524-45
下一個: BM1260F-0527-42
免费一区二区不卡高清av| 国产粉嫩精品久久久| 日本久久精品视频| 欧美黄片资源| 嗯啊啊啊艹啊啊啊| 99精品日韩专区| 一区二区伊人| 欧美最顶级丰满的aⅴ艳星| 女女同同久久| av图片在线| 本庄优花无码播放| 一起日逼视频| 人妻aV鲁丝| 成人无码国产精品秘 久久| 性性国产欧洲在线观看| 7m午夜福利| 日本韩国久久久免费| 亚洲色图欧美大鸡巴操逼操| 大鸡巴日屄| 欧美mv一区| 午夜av天堂电影| 久久久久久久三级视频| 国产三级的精品视频| 淫荡人妻饥渴| 三级伦理一区二区成人| 又粗又大又黄欧美男女视频| 午夜福利制92| 国产人妻一区在线播| 久久高清精品免费视频| 激情福利91| 青青草97国产日韩| av色资源一区| 99热超碰在线精品| 久久久991精品欧美| 香蕉一级视频在线观看| 欧美黄毛吊日逼| 日本综合久久六区| 亚洲图片欧美亚洲色片欧美亚洲图片| 伊色婷人久| 亚洲五月天婷婷综合AV| 日本不卡二区摸奶在线播放|