国产精品久久久久久久裸模,搜索欧美一级黄色片,性夜夜久久久夜,国产91在线99

歡迎光臨深圳市銳創(chuàng)達電子有限公司官網(wǎng)
24小時服務(wù)熱線:075582370515
產(chǎn)品中心 > BP1230S-0540
DSC_03001.png
  • DSC_03001.png
  • DSC_03003.png
  • DSC_0299(1).png
  • DSC_0300.png
  • DSC_0659.jpg
  • DSC_0658.jpg
  • DSC_0657.jpg
  • DSC_0656.jpg

BP1230S-0540

1. Technical Parameter

Measuring condition

Part shall be measured under a condition (Temperature: 535, Humidity: 45%85%R.H., Atmospheric pressure: 860 1060hPa) unless the standard condition (Temperature: 25±3, Humidity: 60±10%R.H. Atmospheric pressure: 860 1060hPa) is regulated to measure.

1

Resonant Frequency 

4000±500Hz

2

Operating Voltage

120 Vp-p

3

Rated Current

Max.1mA ,at 4KHz 50% duty Square Wave 5Vp-p

4

Sound Output at 10cm

Min. 75dB,at 4KHz 50% duty Square Wave 5Vp-p

5

Capacitance

15000±30%pF at 1KHz

6

Operating Temperature

-20℃~+70

7

Store Temperature

-30℃~+80

8

Net Weight

Approx 0.5g

9

RoHS

Yes

2. Dimensions                                  Unit: mm

1(1).png

*Unit: mm; Tolerance: ±0.3mm Except Specified

*Housing Material: Black LCP

*Terminal plate: 2 soldering pads, tin Plating Brass

3. Electrical And Acoustical Measuring Condition

Recommended Setting

2(1).png

4. Frequency Response

3(1).png

5. Surface mounting condition

5.1 Reflow soldering

Recommendable reflow soldering condition is as follows.

5(1).png

Note: (1) In automated mounting of the SMD sound transducers on PCB, any bending, expanding and pulling forces or shocks against the SMD sound transducers shall be kept minimum to prevent them from electrical failures and mechanical damages of the devices.

(2) In the reflow soldering, too high soldering temperatures and too large temperature Gradient such as rapid heating or cooling may cause electrical failures and mechanical damages of the devices.


5.2 Soldering pattern

6(1).png

6. Reliability Test

After any following tests the part shall meet specifications without any degradation in

appearance and performance except SPL. SPL shall not deviate more than -10 dB

from the initial value

6.1 Ordinary Temperature Life Test

The part shall be subjected to 96 hours at 25±10. Input rated voltage

Resonant frequency, 1/2 duty Square wave.

6.2 High Temperature Test

The part shall be capable of with standing a storage temperature of +80 for 96 hours.

6.3 Low Temperature Test 

The part shall be capable of with standing a storage temperature of -30 for 96 hours.

6.4 Humidity Test

Temperature:+40℃±3℃   Relative Humidity:90%95% Duration: 48 hours

and expose to room temperature for 6 hours

6.5 Temperature Shock Test

Temperature:60/1hour25/3hours-20/1hour25/3hours (1cycle)

Total cycle: 10 cycles

6.6 Drop Test

Standard Packaging From 120cm(Drop on hard wood or board of 5cm thick,

three sides, six plain.)

6.7 Vibration Test

Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes

6.8 Reflow Test

Use recommendable reflow soldering condition (as shown in 5.1)

(1) No abnormality should be found after reflow

(2) Good soldering to meet soldering requirements

 

 

Note:

As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. SPL down) may occur if foreign material enter it.


7. Packing

7.png

8.png

上一個: BP1109S-0541
下一個: BP1440S-0540
欧美日本中文不卡| 啊啊啊嗯嗯不要在线视频| 射久久天天射| 超碰中文字幕1| 老鸭窝狠狠干| 成人免费在线国产日韩欧美| 无码1024| 在线电影H| 美女少妇出轨网站| 国产精品之偷拍久久一区二区二区| 91麻豆视频久久| 久久人体大胆视频| 久艹热久十久艹| 久热最新在线观看视频| 欧美伊香蕉久综合| 国产片久久久久久久| 综合无码| 中文字幕86一区二区久久| 激情精品福利| 日韩av中文字幕第二| 日本伊人一区二区| 亚洲视频男人天堂| AV诱惑在线观看| 性生活视频免费不卡的| 色婷婷狠狠调教美女91| 人人妻人人澡Av天堂香蕉| 免费传媒av| 乱伦视频xx| 日韩无码998| 狠狠狠的干| 夫妻性生活一级视频| www.69av| av性感少妇一区合集| 国产成人免费精品无码一区二区 | 大鸡巴操逼一级| 日韩电影人人操| 色色四播放| 欧美日韩中字一区二区| 日本日本岛国白嫩喷水99日| 亚洲一区二区三区色图| 香蕉黄色一级生活片|