国产精品久久久久久久裸模,搜索欧美一级黄色片,性夜夜久久久夜,国产91在线99

歡迎光臨深圳市銳創達電子有限公司官網
24小時服務熱線:075582370515
產品中心 > BP1625S-0340
IMG_0010_副本.jpg
  • IMG_0010_副本.jpg
  • IMG_0013_副本.jpg
  • IMG_0012_副本.jpg
  • IMG_0009_副本 - 複製.jpg

BP1625S-0340

1. Technical Parameter

Measuring condition

Part shall be measured under a condition (Temperature: 535, Humidity: 45%85%R.H., Atmospheric pressure: 860 1060hPa) unless the standard condition (Temperature: 25±3, Humidity: 60±10%R.H. Atmospheric pressure: 860 1060hPa) is regulated to measure.

1

Resonant Frequency 

4000±500Hz

2

Operating Voltage

3Vp-p

3

Rated Current

Max.1mA ,at 4KHz 50% duty Square Wave 3Vp-p

4

Sound Output at 10cm

Min. 70dB,at 4KHz 50% duty Square Wave 3Vp-p

5

Capacitance

15000±30%pF at 1KHz

6

Operating Temperature

-20℃~+70

7

Store Temperature

-30℃~+80

8

Net Weight

Approx 0.5g

9

RoHS

Yes

2. Dimensions                  Unit: mm

1(3).png

*Unit: mm; Tolerance: ±0.3mm Except Specified

*Housing Material: Black LCP

*Terminal plate: 2 soldering pads, tin Plating Brass

3. Electrical And Acoustical Measuring Condition

Recommended Setting

2(3).png

4. Frequency Response

3(3).png

3Vp-p 50% duty Square wave,10cm

5. Surface mounting condition

5.1 Reflow soldering

Recommendable reflow soldering condition is as follows.

4(2).png 

Note: (1) In automated mounting of the SMD sound transducers on PCB, any bending, expanding

and pulling forces or shocks against the SMD sound transducers shall be kept minimum

to prevent them from electrical failures and mechanical damages of the devices.

(2) In the reflow soldering, too high soldering temperatures and too large temperature

      Gradient such as rapid heating or cooling may cause electrical failures and mechanical

damages of the devices.


5.2 Soldering pattern

5(3).png

6. Reliability Test

After any following tests the part shall meet specifications without any degradation in

appearance and performance except SPL. SPL shall not deviate more than -10 dB

from the initial value

6.1 Ordinary Temperature Life Test

The part shall be subjected to 96 hours at 25±10. Input rated voltage

Resonant frequency, 1/2 duty Square wave.

6.2 High Temperature Test

The part shall be capable of with standing a storage temperature of +80 for 96 hours.

6.3 Low Temperature Test 

The part shall be capable of with standing a storage temperature of -30 for 96 hours.

6.4 Humidity Test

Temperature:+40℃±3℃   Relative Humidity:90%95% Duration: 48 hours

and expose to room temperature for 6 hours

6.5 Temperature Shock Test

Temperature:60/1hour25/3hours-20/1hour25/3hours (1cycle)

Total cycle: 10 cycles

6.6 Drop Test

Standard Packaging From 120cm(Drop on hard wood or board of 5cm thick,

three sides, six plain.)

6.7 Vibration Test

Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes

6.8 Reflow Test

Use recommendable reflow soldering condition (as shown in 5.1)

(1) No abnormality should be found after reflow

(2) Good soldering to meet soldering requirements

 

 

Note:

As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. SPL down) may occur if foreign material enter it.


上一個: BP1440S-0540
下一個: BP9019S-0540
美女骚逼频| 国产日本欧美在线伦| 欧美日韩在成人线视频| 超碰97色色| 国产无套精品白浆在线观看| 欧美日韩精品激情在线观看 | 国产精品系列91| 亚洲一区在线观看 色欲| 草视频在线精品视频| 亚洲熟女综合社区| 一级a爱欧美| 中文字幕永久| 成人网站免费在线性感| 张家川| 久久夜夜天天爽| 97精品伊人久久大香线蕉| 亚洲美女一级二级三| 夫妻性生活毛片免费看电影| 亚洲Av午夜在线观看| 国产又大又长又粗三级| 又大又粗又硬又黄欧美视频免费看 | 日本综合久久在| 亚洲精品91白丝在线| 91九色蜜臀porn| 欧美精品天天操| 久久久久久久久久久韩国| MOMOKARIN一区二区三区| 偷拍区图片区综合图区| 久久久精品久久久久三级| 呦呦色在线视频| 色逼综合婷婷| 国产麻豆三级在线观看| 91看大片欧洲老熟妇| 青青青青青青色综合| 午夜中文字幕精品| 少妇午夜精品久久久久久久| 理伦片一二三区| 人妻无码视频一区二区三区| 湿乐园AV一区| 中国少妇一级免费黄色电影| AV录像免费看|