黄色免费AV,六月婷婷激情,av中文字幕网免费观看,久久九九久精品国产日韩经典

Welcome to the official website of TAT Electronics Co.,Ltd 

24-hour service hotline:075582370515
Products > S36
DSC_1440.JPG
  • DSC_1440.JPG
  • DSC_1441.JPG

S36

1. SPECIFICATION

Speaker

1

Dimension

Φ36×H5.0

2

Net Weight

Approx 3.0g

3

Impedance

8±15%Ω at1.0KHz,1.0Vrms

4

Rated Input Power

0.5W

5

Max Input Power

1.0W

6

Lowest Resonance Frequency

550Hz±20%

7

Frequency Range

F010 kHz

8

Sound Pressure Level

83±3 dB at0.8,1.0,1.2,1.8KHz

Input: 1.0W at 100cm

9

Distortion

Not exceed 5% at 1KHz, Input:1.0W

10

Buzzes & Rattles

Must be free audible noise, From F010KHz

frequency range, Input: 2.83V 1.0W

11

Operating Temperature

-20℃~+100

12

Store Temperature

-30℃~+100

Dimensions                                     Unit: mm

1(7).png

*Unit: mm; Tolerance: ±0.5mm Except Specified

2. Reliability Test

After any following tests the part shall meet specifications without any degradation in

appearance and performance except SPL. SPL shall not deviate more than -10 dB

from the initial value

2.1 Ordinary Temperature Life Test

The part shall be subjected to 96 hours at 25±10. Input rated voltage

Resonant frequency, 1/2 duty Square wave.

2.2 High Temperature Test

The part shall be capable of with standing a storage temperature of +85 for 96 hours.

2.3 Low Temperature Test 

The part shall be capable of with standing a storage temperature of -40 for 96 hours.

2.4 Humidity Test

Temperature:+40℃±3℃   Relative Humidity:90%95% Duration: 48 hours

and expose to room temperature for 6 hours

2.5 Temperature Shock Test

Temperature:70/1hour25/3hours-30/1hour25/3hours (1cycle)

Total cycle: 10 cycles

2.6 Drop Test

Standard Packaging From 1.2m(Drop on hard wood or board of 5cm thick,

three sides, six plain.)

2.7 Vibration Test

Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes

Note:

As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. SPL down) may occur if foreign material enter it.


3. Electrical And Acoustical Measuring Condition

2(7).png 3(7).png

4. Frequency Response

4(6).png

1.0W,10cm


Previous: S30
Next: S50